If you have a chain pulley system, examine the chain control mechanism and make sure the chain hasn’t come off the sprocket wheel. If it has, simply loop it back round and this should solve your problem. If parts are worn, bent or rusted, you will need to replace the tilter mechanism.
The most common reason for slats getting stuck and unable to be lowered or raised is that their cord is trapped in its lock mechanism. To release it, raise the cord until it’s level with the headrail at the top of your blinds, and then gently tug on it. This should release the lock mechanism …
Each bracket should be placed at the height you previously determined and about four to six inches from the side of the window frame. (This will allow you to open the curtains completely.) Check to make sure your pencil marks are level otherwise the entire curtains will be crooked.
Electrical Wiring Services. Cable Laying Service. Residential Electrical Works. Electrical Control Panel Service. Laboratory Instrument Services. Electrical Cable Jointing. Light Fitting Service. Electrical Plumbing Services.
Home Renovation Plumbing work New Home Plumbing Work Installation of Wash Basin/Sink Repair of Bathroom fittings Fix faucet/sinks Fix leaky faucet/taps Installation of tubs Sewer pipes/ Drainage pipe Fix Water heaters Fix water leakage
Step 1 : look and smell for signs of mildew Step 2 : Fill a spray bottle with hydrogen peroxide. Step 3 : Turn the unit off Step 4 : Allow it to dry. Step 5 : Do a deeper clean if needed (ifthis method isn’t sufficient, remove the filter with Unit off, and spray …
It’s recommended that you service your home air conditioning system at least once every year.
Step 1 : Dry the Air Condioner Step 2 : Disconnect the Unit from its power source. Step 3 : Cover the Unit with Cleaning Bag. Step 4 : Detach the front panel. Step 5 : Unfasten the Air filters. Step 6 : Wash the Air filters. Step 7 : Clean the Bacteria filters.
Depending on the type of AC the price varies , it ranges from 400 to 700 Rupees. The overall price will vary by location and the type of service you are getting.
Step 1 – Switch off its power supply and open the AC panel. Step 2 – Remove the filter. Step 3 – Take a toothbrush and gently clean the evaporator to remove any dirt. Step 4 – After using the toothbrush, take a clean cloth and remove the dust from the AC Step 5 – …
